QUICK START MANUAL
Above screen shot is the Parameter for Handheld Laser Welding Machine welding 2mm carton steel,
For other materials and thickness, please adjust on the basis of the related parameters below.
1. Explaination about the main parameters which may need to be adjusted
(1)Laser Control -Power: I t is adjusted according to the thickness and the heat energy absorption of product, generally the thicker the product, the greater the power will be used, stainless steel and carbon steel normally use 50%, aluminum generally use 80%
(2)Laser Control –Mode : solid circle with maximum heat
(3)Motor Control –Width: if want to weld thicker, set the width the smalle, then heat is more higher
(4)Gas control– Advance delay /Delay ： Advance and delay time of gas
spray,normally keep same same setting as above screen shot,Advance gas spray can protect the protecting lens not easy to damage.
(5)Gas Control-Proportion: controls the amount of gas, generally without adjustment.
2. Handheld Laser Welding Machine operation note
When working, the red clamps need to be clamped to the workpiece or to the gun head in order to produce light.
2. Handheld Laser Welding Machine Maintenance simple note
Water chiller :
Check the water quality in the chiller, if it is clean and thorough, it can be changed once every 6 months.